WSERD30B 2/31 – internal roller blinds

Approx. 12 months between charges on average.
Quietest battery motor on the market.
Ground-breaking coreless drive.
Suitable for up to 10ft x 10ft roller blind.

WSERD30-B instructions – click here

WSER Series programming sequences – click here

Product Description

  • DC 12V power supply
  • Electronic limit switch
  • Built-in receiver

The WSERD30B 2/31 motor has internal lithium rechargeable batteries with approximately 12 months of an average use of 750 up/down cycles between charges on an 8ft x 8ft blind. It can be used on blinds up to 10ft x 10ft.

This new version of our popular battery motor has a new ground-breaking coreless DC drive inside, that is much more efficient and much quieter than other battery motors.

The fittings for this motor will allow it to be used with a range of tube sizes from 30-50mm in diameter. All of the charging intelligence is taken care of inside the motor, not by a 3rd party charger. This eliminates many of the issues experienced by other brands of DC motors. The motor will indicate both when charging is required, and completed. It cannot be overcharged and it will not start to discharge when the batteries are full as other brands may do. The charger plugs directly into the motor head so there is no need for an unsightly charging cable.

  • ALDC charger required
  • (Charger comes with 13ft cable, 10ft cable also available)

 

12 Volt DCType 2/31
Rated Torque (N.m)2
Output Speed (rpm)31
Nominal Consumption (W)16.3
Nominal Voltage (V)11.1
Nominal Current (A)1.3
Protection Index (IP)20
Total Length (in)20.6
Maximum Turnsinfinity
Net Weight (lb)1.2
Max Lifting Capacity (ft)9.8x9.8

PLEASE NOTE:

• To keep product in good condition, please charge the motor every 3 months.

• Please do not let children play with the remote or motor.

• Storage temperature: -4°F to 149°F

  

SAFETY GUIDELINES FOR ALPHA TUBULAR MOTORS

At Alpha Tubular Motors, your safety and the effective operation of our tubular motors with lithium-ion batteries are our top priorities. We kindly ask you to follow these important safety guidelines:

Avoid Overcharging

Please disconnect the motor from the charger as soon as the green light indicates a full charge. Overcharging can lead to overheating and may pose a fire risk.

Prevent Overheating

To help prevent overheating, ensure the motor is not exposed to high temperatures or direct sunlight for extended periods.

Immediate Action

If you notice any unusual warmth, discoloration, or odors coming from the motor, please disconnect it from the power source and stop using it right away.

Proper Storage

Store the motor in a cool, dry place, away from flammable materials. For best results, keep it within a temperature range of -4°F to 149°F.

Use Approved Chargers

Always use the charger that comes with the motor or an approved replacement. Using incompatible chargers can create safety hazards.

Disposal

Please dispose of lithium-ion batteries according to local regulations. Avoid incinerating or submerging them in water, as this can lead to dangerous reactions.

Additional Notes

To keep your motor in top shape, charge it every six months.

For safety, please ensure that children do not play with the remote or motor.

Liability Disclaimer

While we at Alpha Tubular Motors strive to provide safe and reliable products, we cannot accept liability for any damage or personal injury resulting from improper use, charging, storage, or handling of our motors or their lithium-ion batteries. By using our products, you acknowledge that you have read, understood, and agree to follow these safety guidelines.

WSERD30B 2/31 – internal roller blinds
WSERD30B 2/31 – internal roller blinds